Financials

SDE vs EBITDA (and Adjusted EBITDA): Which One Sets Your Sale Price?

Buyers price smaller, owner-run businesses on seller's discretionary earnings and larger, managed ones on adjusted EBITDA. Here is how each is calculated from the same P&L, which multiples go with each, and how to present both.

Key takeaways
  • SDE adds back all of one owner's pay. Adjusted EBITDA swaps that pay for the market cost of a manager, so on the same P&L it comes out lower by about one manager's salary.
  • Buyers generally use SDE for owner-operated businesses with less than about $1 million of earnings, and adjusted EBITDA above that or when a management team is in place.
  • Multiples rise with size: in Q2 2026, business brokers reported 2.0× to 3.1× SDE for deals under $2 million and 4.0× to 5.8× EBITDA for deals of $2 million to $50 million.
  • The measure and the multiple must match. An EBITDA multiple on SDE overstates your value, and buyers will catch it.
SDE or EBITDA: which one sets your sale price? The short answer

Buyers price smaller, owner-run businesses on seller's discretionary earnings (SDE) and larger or manager-run businesses on adjusted EBITDA, usually switching around $1 million of earnings. Your price is that earnings figure times a multiple drawn from the same measure, so the right pairing matters more than which number looks bigger.

Every offer for a private business starts with one earnings number and one multiple. Owners often hear both SDE and EBITDA in the same conversation and assume they are interchangeable. They are not. On the same set of books, the two figures can differ by well over $100,000, and each comes with its own range of multiples. Use the wrong pair and your asking price can be off by hundreds of thousands of dollars in either direction.

The difference comes down to one question: who runs the business after the sale? This guide explains each measure, walks one illustrative company through both calculations, shows which multiples go with each and explains how to present your numbers so a buyer can trust them.

Key numbers for SDE and EBITDA valuations
MeasureFigureSource
Earnings level where buyers usually switch from SDE to EBITDA (2026)About $1M of earningsMorgan & Westfield, updated April 2026
Purchase price where brokers switch from SDE to EBITDA multiples, Q2 2026$2MIBBA and M&A Source Market Pulse, Q2 2026
Multiples of SDE, deals under $2M, Q2 20262.0× (under $500K); 2.8× ($500K–$1M); 3.1× ($1M–$2M)IBBA and M&A Source Market Pulse, Q2 2026
Multiples of EBITDA, deals of $2M–$50M, Q2 20264.0× ($2M–$5M); 5.8× ($5M–$50M)IBBA and M&A Source Market Pulse, Q2 2026
Average cash-flow multiple, Q3 20262.30× under $1M; 3.73× over $1MBizBuySell, Q3 2026
Median cash flow of businesses sold, Q3 2026$123,000 under $1M; $559,000 over $1MBizBuySell, Q3 2026
Median annual wage, general and operations managers, May 2025$105,770US Bureau of Labor Statistics

What are SDE, EBITDA and adjusted EBITDA?

All three measures start from your profit and loss statement and add back costs that a new owner would not carry. They differ in one decision: whether the owner's own job is treated as a cost of running the business.

Seller's discretionary earnings (SDE)

SDE estimates the total financial benefit the business produces for one full-time owner-operator. Start with pre-tax net income, then add back interest, depreciation and amortization, non-recurring and non-operating items, personal perks run through the business, and the total compensation of one working owner. Under the IBBA definition, the pay of any other owners is adjusted to market value rather than added back in full (Morgan & Westfield). BizBuySell uses “cash flow” and SDE as the same measure for smaller, owner-operated companies. The logic is simple: the buyer will step into your job, so your pay becomes part of their return.

EBITDA

EBITDA stands for earnings before interest, taxes, depreciation and amortization. Reported EBITDA is plain arithmetic on your P&L: net income plus those four items. Unlike SDE, it keeps everyone's pay, including yours, as an operating expense. It shows what the business earns for an investor who does not work in it. If your company is a pass-through entity, such as an S corporation, there may be no entity-level income tax to add back at all.

Adjusted EBITDA and normalized EBITDA

Buyers rarely price raw EBITDA. They adjust it so it reflects a typical year under normal ownership. Wipfli, an accounting and advisory firm, groups the common adjustments into five areas: owner and executive pay above or below market rate, leasing versus owning equipment and facilities, unusual or non-recurring items, related-party transactions such as above-market rent paid to the owner, and discretionary expenses. “Adjusted EBITDA” and “normalized EBITDA” usually mean the same thing. Neither is defined by accounting standards, so there is no official list of adjustments. That is why buyers question every one. When an M&A advisor says “EBITDA,” they usually mean adjusted EBITDA (Morgan & Westfield).

The practical difference is the owner line. SDE adds back all of one owner's compensation. Adjusted EBITDA adds back only the part above market rate, because a buyer who does not plan to run the business will have to pay someone to do your job. If you pay yourself less than market, adjusted EBITDA deducts the shortfall instead.

How do you calculate SDE and adjusted EBITDA from the same P&L?

Take an illustrative commercial cleaning company with $5 million of revenue. The owner works full-time as president, and the company is an S corporation, so it pays no entity-level income tax in this example. Last year it reported $500,000 of pre-tax net income. Buried in its expenses are $220,000 of owner salary and payroll taxes, $40,000 of owner health insurance, retirement contributions and vehicle costs, $30,000 of interest on equipment loans, $60,000 of depreciation and amortization, and a one-time $50,000 cost of moving to a new facility.

Step 1: From net income to EBITDA

Add interest and depreciation and amortization back to net income: $500,000 plus $30,000 plus $60,000 gives reported EBITDA of $590,000. There are no income taxes to add back because the S corporation passes its income through to the owner. This is the number on your books before anyone argues about adjustments, and it is the starting point a lender or a larger buyer will recognize.

Step 2: From EBITDA to adjusted EBITDA

First, add back the $50,000 move, as long as you can show it will not recur. Next, normalize the owner's pay. The owner costs the business $260,000 a year in salary, payroll taxes and benefits. In this example, a general manager able to run a $5 million cleaning company would cost about $160,000 including payroll taxes and benefits. For context, the national median wage for general and operations managers was $105,770 in May 2025, before benefits (US Bureau of Labor Statistics), and Morgan & Westfield puts market-rate pay for a top manager in the lower middle market at $150,000 to $300,000. The $100,000 above market is added back. Adjusted EBITDA is $590,000 plus $50,000 plus $100,000, or $740,000.

Step 3: From adjusted EBITDA to SDE

SDE assumes the new owner does the manager's job and takes the manager's pay as part of their return, so the $160,000 market salary is added back too. SDE is $900,000. You can check it from the top: $500,000 of net income plus $220,000 of owner pay, $40,000 of owner benefits, $30,000 of interest, $60,000 of depreciation and amortization and the $50,000 move also equals $900,000. Figure 1 shows the whole bridge.

Figure 1One P&L, three earnings figures
Net income (pre-tax)
$500K
+ Interest
+$30K
+ Depreciation and amortization
+$60K
= EBITDA, as reported
$590K
+ One-time facility move
+$50K
+ Owner pay above market rate
+$100K
= Adjusted EBITDA
$740K
+ Market-rate manager pay
+$160K
= SDE
$900K
$0$250K$500K$750K$1M
Earnings subtotalAdded back

Illustrative. A hypothetical commercial cleaning company with $5 million of revenue, organized as an S corporation. Owner pay and manager pay include payroll taxes and benefits.

Illustrative: the same P&L produces reported EBITDA of $590K, adjusted EBITDA of $740K and SDE of $900K. The $160K gap between adjusted EBITDA and SDE is the market cost of a manager to do the owner's job.
View the data behind this figure
Net income (pre-tax)$500K
+ Interest$30K
+ Depreciation and amortization$60K
= EBITDA, as reported$590K
+ One-time facility move$50K
+ Owner pay above market rate ($260K paid vs. $160K market)$100K
= Adjusted EBITDA$740K
+ Market-rate manager pay$160K
= SDE$900K

The two answers differ by exactly the cost of a market-rate manager. That makes the replacement salary the most important assumption between them. If a buyer argues that the job really needs $200,000, adjusted EBITDA falls to $700,000. At a 4.0× multiple, that $40,000 disagreement is worth $160,000 of price.

Which one will buyers use for your business?

Size sets the default

Morgan & Westfield says SDE is normally used for businesses with less than about $1 million of SDE, and EBITDA for businesses with more than about $1 million of EBITDA. BizBuySell draws the line a little higher: businesses earning more than one or two million dollars often use EBITDA because buyers rely on professional managers, and they are typically bought by private equity firms or competitors. Business brokers and M&A advisors surveyed for the IBBA and M&A Source Market Pulse report multiples of SDE for deals under $2 million and multiples of EBITDA from $2 million to $50 million. One rule uses earnings and the other uses price, but they meet in the same place: at the 3.1× SDE multiple reported for $1 million to $2 million deals, a $2 million price implies about $645,000 of SDE.

Figure 2Which measure buyers use, by deal size
Owner-run · SDEManager-run · EBITDA
Under $500K

Small owner-run businesses

  • SDE: 2.0× in Q2 2026
  • Buyer usually runs it
  • One owner's full pay added back
$500K to $2M

Larger owner-run businesses

  • SDE: 2.8× to 3.1×
  • Near $1M of earnings, buyers may ask for both
  • A manager in place supports EBITDA
$2M to $5M

Businesses with a manager in place

  • EBITDA: 4.0×
  • Competitors and private equity buy here
  • Market-rate manager pay deducted
$5M to $50M

Lower middle market companies

  • EBITDA: 5.8×
  • Management team expected to stay
  • Adjustments tested line by line

Deal size is the purchase price. Multiples: IBBA and M&A Source Market Pulse, Q2 2026. Buyer types: BizBuySell, Seller's Discretionary Earnings (SDE): An Overview.

Business brokers price deals under $2 million on SDE and deals of $2 million to $50 million on EBITDA. The switch tracks whether the owner or a manager will run the business after the sale.
View the data behind this figure
Under $500KSDE2.0×
$500K to $1MSDE2.8×
$1M to $2MSDE3.1×
$2M to $5MEBITDA4.0×
$5M to $50MEBITDA5.8×

Who will run it matters as much as size

Size is a default, not a rule. The real test is what the buyer plans to do on the Monday after closing. An individual buyer who will run the business day to day thinks in SDE, because your salary becomes theirs. A private equity firm, a competitor or a buyer who keeps a manager in place thinks in adjusted EBITDA, because they will pay someone to do your job.

A business near the boundary, with earnings somewhere around $1 million, may attract both kinds of buyer, so expect to hear both measures. If a general manager already runs the business, that pay is already in your expenses and adjusted EBITDA is the natural yardstick. If the business still runs on you, an EBITDA buyer will ask who replaces you and how much that costs. Our guide to reducing owner dependence covers how to answer that question before a buyer asks it.

Which multiples go with SDE and with EBITDA?

Smaller deals: multiples of SDE

For deals under $2 million, business brokers and M&A advisors reported multiples of 2.0× SDE for businesses selling for under $500,000, 2.8× from $500,000 to $1 million, and 3.1× from $1 million to $2 million in the second quarter of 2026 (IBBA and M&A Source Market Pulse). BizBuySell's closed-deal data for the third quarter of 2026 tells the same story. Businesses that sold for under $1 million had median cash flow of $123,000 and an average multiple of 2.30×. Those that sold for more than $1 million had median cash flow of $559,000, a median price of $1.8 million and an average multiple of 3.73× (BizBuySell data, as reported by Small Business Trends). Larger earnings bought a higher multiple, not just a bigger price.

Larger deals: multiples of EBITDA

From $2 million up, the Market Pulse switches to EBITDA. Brokers and M&A advisors reported 4.0× EBITDA for deals of $2 million to $5 million and 5.8× for $5 million to $50 million in Q2 2026, up from 3.9× and 5.5× a year earlier. Figure 3 puts all five size bands side by side.

Figure 3Multiples by deal size, Q2 2026
Under $500K · SDE
2.0×
$500K–$1M · SDE
2.8×
$1M–$2M · SDE
3.1×
$2M–$5M · EBITDA
4.0×
$5M–$50M · EBITDA
5.8×
0×1×2×3×4×5×6×
Multiple of SDEMultiple of EBITDA

Source: IBBA and M&A Source, Market Pulse Q2 2026 Highlights. Deals under $2 million are reported as multiples of SDE; $2 million to $50 million as multiples of EBITDA.

Multiples rise with deal size: 2.0× to 3.1× SDE for deals under $2 million and 4.0× to 5.8× EBITDA for deals of $2 million to $50 million in Q2 2026. Part of the jump at $2 million is a change of yardstick, not just of price.
View the data behind this figure
Deal size (purchase price)MeasureQ2 2026Q2 2025
Under $500KSDE2.0×2.3×
$500K to $1MSDE2.8×2.8×
$1M to $2MSDE3.1×3.0×
$2M to $5MEBITDA4.0×3.9×
$5M to $50MEBITDA5.8×5.5×

EBITDA multiples are higher for two reasons. The earnings figure is smaller for the same business, because a manager's salary has already been deducted. And larger companies with managers in place are usually less risky to own: they depend less on one person and often have more customers and systems. Morgan & Westfield makes the same point: multiples of EBITDA are naturally higher than multiples of SDE. These figures are averages across many industries. Your own multiple depends on growth, customer mix, margins and transferability; our guide to what your business is worth explains what moves it.

Which one sets your sale price?

Return to the cleaning company. Priced as an owner-operated business on SDE, using the 3.1× multiple reported for the largest SDE band, $900,000 of SDE supports about $2.79 million. Priced as a managed business on adjusted EBITDA at the 4.0× reported for $2 million to $5 million deals, $740,000 supports about $2.96 million. The two correct pairings land within about 6% of each other, because the lower earnings figure earns the higher multiple. Figure 4 shows what happens when the pairs are mixed up.

Figure 4One business, four prices
SDE × 3.1
$2.79M
Adjusted EBITDA × 4.0
$2.96M
SDE × 4.0
$3.60M
Adjusted EBITDA × 3.1
$2.29M
$0$1M$2M$3M$4M
Measure and multiple matchMeasure and multiple mismatched

Illustrative. Multiples are the Q2 2026 Market Pulse figures for $1M–$2M deals (3.1× SDE) and $2M–$5M deals (4.0× EBITDA).

Illustrative: matched pairs value the cleaning company at $2.79M on SDE and $2.96M on adjusted EBITDA, within about 6% of each other. Mixing them up gives $3.60M or $2.29M, off by roughly half a million dollars in either direction.
View the data behind this figure
$900K SDE × 3.1 (matched)$2,790,000
$740K adjusted EBITDA × 4.0 (matched)$2,960,000
$900K SDE × 4.0 (mismatched)$3,600,000
$740K adjusted EBITDA × 3.1 (mismatched)$2,294,000

What the mismatches cost

Put the EBITDA multiple on SDE and you get $3.6 million, about $640,000 above the EBITDA-based value. Owners make this mistake when they hear a rule of thumb that companies “sell for four or five times” and apply it to their own SDE. A buyer will reprice it on the first call. The opposite mistake happens too. A buyer who quotes an SDE-style multiple of 3.1× on your adjusted EBITDA is offering about $2.29 million, roughly $496,000 below the SDE-based value. Always ask which earnings figure and which multiple sit behind a number, including the price in a buyer’s letter of intent.

So which number wins?

Your price is set by the measure your most likely buyer uses. At $2.8 million to $3 million, this business sits in the $2 million to $5 million band where brokers report EBITDA multiples, and buyers at that size are often companies or investors who will not run it themselves. If the owner can show a capable manager already in place, the adjusted EBITDA case is stronger. If the owner is the business, many buyers will fall back to SDE, and the replacement salary they assume will move the price.

How to present both to buyers

Build one bridge from your tax return

Give buyers a single schedule, not two competing ones. Start with net income as reported on your tax return, list each adjustment once, and show subtotals for EBITDA, adjusted EBITDA and SDE, just like Figure 1. Do this for the last three years and the year to date, so buyers can see that one-time items really happened once. Attach the evidence behind each line: payroll records, invoices, the settlement agreement or the moving contract. Our guide to SDE add-backs buyers accept lists the documents buyers expect for each type of adjustment.

Support the replacement salary

The manager salary is the swing number between your two measures, so do not leave it to the buyer. Write a short description of what you actually do each week, then price that role with local salary data or a recruiter's estimate, and include payroll taxes and benefits. National figures are only a floor: the BLS median for general and operations managers covers companies of every size. If you already employ a general manager, show their pay and responsibilities, and explain what changes when you leave.

Label every number

Put the name of the measure next to every earnings figure in your marketing materials, and quote multiples that match it. If a broker's valuation or listing shows “cash flow,” confirm that it means SDE. Because adjusted EBITDA has no standard definition, spell out which adjustments it includes. Buyers of larger companies often hire accountants to test those adjustments in a quality-of-earnings review, and every item you can support in advance is one less reason to cut the price.

Mistakes that cost owners money

  • Putting an EBITDA multiple on SDE. It overstates value and costs you credibility with every serious buyer.
  • Adding back two owners' salaries. SDE adds back one working owner. Other owners' pay is adjusted to market, not removed.
  • Assuming a cheap replacement manager. A low salary inflates adjusted EBITDA until a buyer prices the job properly.
  • Calling recurring costs one-time. Buyers read three years of statements and spot repeats quickly.
  • Ignoring equipment spending. Neither SDE nor EBITDA subtracts capital spending, but buyers will estimate it.
  • Quoting a number without naming the measure. An unlabeled figure invites the buyer to choose the version that suits them.

Next steps

  1. Pull three years of tax returns and profit and loss statements, plus year-to-date results.
  2. Build one bridge from net income to EBITDA, adjusted EBITDA and SDE, with evidence for each line.
  3. Describe your own role and price a market-rate replacement, including payroll taxes and benefits.
  4. Decide which type of buyer you are most likely to attract, and lead with the measure they use while showing the other.
  5. Check your range against current multiples for your deal size with a broker or M&A advisor; our guide to selling a business compares the options.
  6. Take the Exit Readiness Scorecard to see which value drivers are holding your multiple back.

If your sale is a year or more away, there is time to move both numbers. WorthAccelerator gives you an indicative valuation range, shows which value drivers are holding it back and keeps you on a 90-day plan to fix them, while tax, legal and deal work stay with your advisors.

Frequently asked questions

Is SDE the same as EBITDA?

No. Both add back interest, depreciation, amortization and one-time items, but SDE also adds back all of one working owner's compensation. EBITDA treats the owner's job as a cost the buyer must pay someone to do. For the same business, SDE is higher by roughly the market cost of a manager.

Is adjusted EBITDA the same as normalized EBITDA?

Usually, yes. Both describe EBITDA adjusted for one-time items, owner pay above or below market, related-party transactions and other items that won't continue under new ownership. Neither is defined by accounting standards, so always ask which adjustments a figure includes.

Why are EBITDA multiples higher than SDE multiples?

EBITDA is a smaller number for the same business because a manager's salary has been deducted, and companies valued on EBITDA are usually larger and less dependent on one person. In Q2 2026, business brokers reported 2.0× to 3.1× SDE for deals under $2 million and 4.0× to 5.8× EBITDA for deals of $2 million to $50 million.

At what size do buyers switch from SDE to EBITDA?

Commonly at around $1 million of earnings, or a purchase price of about $2 million. The type of buyer matters too: individuals who will run the business use SDE, while private equity firms and competitors that install or keep a manager use adjusted EBITDA.

Should I show buyers both SDE and adjusted EBITDA?

If your business is near the boundary, yes. Show one bridge from tax-return net income through EBITDA and adjusted EBITDA to SDE, so any buyer can see both and how they connect. Lead with the measure your most likely buyer uses, and label every figure.

Sources

Last reviewed November 16, 2026. Market multiples are from the sources above and change each quarter.

This article is general information for business owners, not tax, legal or investment advice. Figures labeled illustrative describe hypothetical companies. Talk to your CPA, attorney or M&A advisor about your situation.

Know what it’s worth.See what it could be.

Your free value snapshot needs no sales call. Upload your P&Ls and see where you stand.