Valuation

How to Value a Small Business (and What Yours Is Worth)

Most small businesses are valued as a multiple of normalized earnings, then checked against what similar businesses sold for and what a buyer's lender will finance. Here are the methods, current market multiples and a worked example you can follow with your own numbers.

Key takeaways
  • Most small businesses are valued as normalized earnings times a market multiple: SDE for owner-run companies, adjusted EBITDA for larger ones with managers in place.
  • In Q3 2026, businesses that sold for more than $1 million averaged 3.73 times cash flow, against 2.30 times for those that sold for less (BizBuySell).
  • The multiple prices risk. Owner dependence, customer concentration and books that are hard to verify push it down; recurring revenue and a capable team push it up.
  • Test every estimate against the income and asset approaches and against what a buyer's lender can finance. Under SBA rules from October 1, 2026, that test uses past results, not projections.
How do you value a small business? The short answer

Multiply normalized earnings (SDE for owner-run businesses, adjusted EBITDA for larger ones) by a multiple from comparable sales, adjusted for risk. Then check the result against the income and asset approaches and what a buyer's lender will finance. Where those ranges overlap is your working range.

If you have searched “how much is my business worth,” you are in good company. In BizBuySell's second-quarter 2026 survey of owners, only 14% had completed a professional business valuation. Half had only a rough estimate of what their company is worth, and 35% said they did not know its value at all (BizBuySell Insight Report, Q2 2026, via Small Business Trends).

This guide shows how to value a small business the way buyers, lenders and appraisers do: start with normalized earnings, apply the right method and multiple, adjust for risk, then test the answer against what a lender will finance. A worked example follows one illustrative company through every step, and the current market data near the end lets you sanity-check your own numbers.

Key numbers for valuing a small business
MeasureFigureSource
Businesses sold, Q3 20262,132 (down 7% year over year)BizBuySell Insight Report, Q3 2026
Median sale price, Q3 2026$350,000 (up 17% year over year)BizBuySell Insight Report, Q3 2026
Average cash-flow multiple, Q3 20262.30× for businesses sold under $1M; 3.73× over $1MBizBuySell Q3 2026, via Small Business Trends
Median cash flow of businesses sold, Q3 2026$123,000 under $1M; $559,000 over $1MBizBuySell Q3 2026, via Small Business Trends
Average sale price as a multiple of revenue and earnings, 20250.69× revenue; 2.61× earningsBizBuySell, How to Value a Business (2025 data)
EBITDA multiple, deals of $5M–$50M, Q2 20265.8× (up from 5.5×)IBBA and M&A Source Market Pulse, Q2 2026
Owners with a professional valuation, Q2 202614%BizBuySell Q2 2026, via Small Business Trends
Buyers expecting to use SBA financing, Q3 202678%BizBuySell Insight Report, Q3 2026
Minimum cash-flow coverage for most SBA 7(a) acquisition loans, from Oct 1, 20261.25× loan payments, on historical resultsSBA SOP 50 10 8.1, as summarized by Starfield & Smith

How much is my business worth? Why the answer is a range

Owners without a number tend to anchor on something else: a competitor's rumored sale price, a figure from a peer group or the amount they need to retire. None of those is what a buyer will pay. Your business is worth what a qualified buyer will pay, on terms their lender will finance, after they have checked your numbers.

That is why an honest valuation is a range. Different buyers see different risks, different methods give different answers, and the price on paper is not the same as the cash you receive at closing. The goal is not one perfect number but a range you can defend with evidence, and a clear view of what would move it. Most small business valuations follow the same five steps:

  1. Normalize earnings into seller's discretionary earnings (SDE) or adjusted EBITDA.
  2. Choose a method, usually a market multiple drawn from comparable sales.
  3. Adjust the multiple for your risks and strengths.
  4. Cross-check the answer with the income and asset approaches.
  5. Test the result against what a buyer's lender can finance.

Step 1: Which earnings do buyers value, SDE or EBITDA?

Almost every small business valuation begins with normalized earnings: what the business earns in a typical year once the owner's personal choices and one-time events are stripped out. Your tax return is rarely that number, because most owners sensibly run the business to minimize taxes.

Seller's discretionary earnings (SDE)

SDE is the total financial benefit available to one full-time owner-operator. It starts with pre-tax profit and adds back the owner's salary and payroll taxes, owner benefits and perks run through the business, interest, depreciation and amortization, and genuinely one-time expenses. SDE is the standard measure for smaller, owner-operated businesses, where the buyer will likely step into your role. The question it answers is simple: if a buyer takes over and runs the business personally, how much will it pay them before any loan payments?

Adjusted EBITDA

EBITDA stands for earnings before interest, taxes, depreciation and amortization. Buyers use adjusted EBITDA, which includes the same one-time adjustments as SDE but assumes a paid manager runs the business. Instead of adding back all of your compensation, it deducts a market-rate salary for someone to do your job. Larger companies with a management team in place, and the private equity firms and strategic acquirers that buy them, typically think in EBITDA. The IBBA and M&A Source Market Pulse survey, for example, reports deals of $2 million and up as multiples of EBITDA and smaller deals as multiples of SDE. Our guide to SDE vs EBITDA shows when each one applies.

Figure 1 shows how this works for an illustrative HVAC services company. It reports $410,000 of net income and, as a pass-through entity such as an S corporation, pays no entity-level income tax in this example. Adding back $180,000 of owner salary and payroll taxes, $35,000 of owner benefits and perks, $22,000 of interest, $48,000 of depreciation and amortization and a $25,000 one-time legal expense produces SDE of $720,000. Subtract a market-rate general manager salary of $150,000 and adjusted EBITDA comes to $570,000.

Waterfall chart titled From reported profit to buyer earnings for an illustrative HVAC services company. It starts at net income of $410K, then adds owner salary and payroll taxes of $180K, owner benefits and perks of $35K, interest of $22K, depreciation and amortization of $48K, and a one-time legal expense of $25K, ending at SDE of $720K. A final bar shows adjusted EBITDA of $570K, which is SDE minus a $150K market-rate general manager salary.

Figure 1From reported profit to buyer earnings
IF A MANAGER IS HIREDNet income: $410K$410KNet incomeOwner salary & payroll taxes: +$180K+$180KOwner salary& payrolltaxesOwner benefits & perks: +$35K+$35KOwnerbenefits &perksInterest: +$22K+$22KInterestDepreciation & amortization: +$48K+$48KDepreciation&amortizationOne-time legal expense: +$25K+$25KOne-timelegal expenseSDE: $720K$720KSDEMarket-rate GM salary: −$150K−$150KMarket-rateGM salaryAdjusted EBITDA: $570K$570KAdjustedEBITDA
Reported or totalAdd-back (+)Deduction (−)

Illustrative. A pass-through entity, so no entity-level income tax is shown.

Swipe to see the full figure

Illustrative: for an HVAC services company, add-backs turn $410K of reported net income into $720K of SDE, and deducting a $150K market-rate general manager salary gives adjusted EBITDA of $570K.
View the data behind this figure
Net income$410K
+ Owner salary and payroll taxes$180K
+ Owner benefits and perks$35K
+ Interest$22K
+ Depreciation and amortization$48K
+ One-time legal expense$25K
= SDE$720K
− Market-rate general manager salary$150K
= Adjusted EBITDA$570K

This process is called normalization, and it is where many valuations go wrong. Every add-back needs a clear reason and a paper trail. A buyer will accept a documented one-time legal bill but not a “one-time” expense that shows up every year. Our guide to which SDE add-backs buyers accept goes deeper. Normalization also cuts both ways: if you rent your building from yourself below market, or a family member works in the business without pay, a buyer will adjust earnings down to reflect what those would really cost. Look at three years, not just the latest one, because buyers price the trend as well as the level.

Step 2: Which small business valuation method should you use?

Appraisers group business valuation methods into three families. The IRS's own valuation guidelines name them as the asset-based, market and income approaches and say consideration should be given to all three (Internal Revenue Manual 4.48.4). BizBuySell notes that for small, private businesses a market-based multiple approach is used most often. Rules of thumb sit alongside them as a quick check. Figure 2 compares the four.

Figure 2Four ways to value a small business
Market approach

Best for: Profitable, ongoing businesses; the method used most often

  • Applies multiples from recent sales of similar businesses
  • Reflects what buyers have actually paid
  • Only as good as the comparables behind it
Income approach

Best for: Businesses with steady, predictable earnings

  • Capitalizes one year of cash flow or discounts several (DCF)
  • Makes risk and growth assumptions explicit
  • Small changes in the rate move the answer a lot
Asset approach

Best for: Asset-heavy, unprofitable or closing businesses

  • Assets at fair market value, less liabilities
  • Sets a floor under the other methods
  • Leaves out goodwill in a profitable business
Rule of thumb

Best for: A quick ballpark or sanity check

  • One figure, often revenue, times an industry multiple
  • Fast, and needs only one number
  • Ignores your margins, risk and deal terms
StrengthLimitation

Approaches as described in BizBuySell's valuation guide and IRS Internal Revenue Manual 4.48.4.

The market approach, which prices your earnings off recent sales of similar businesses, does most of the work for a profitable small business. The income approach tests it, the asset approach sets a floor and a rule of thumb is only a ballpark.

Market approach

The market approach values your business by comparison with similar businesses that have sold, usually as a multiple of SDE, EBITDA or revenue. BizBuySell describes it as the most appropriate method for profitable, ongoing businesses, and its strength is that it reflects what buyers have actually paid. Its weakness is comparability. No two businesses are alike, transaction data can be thin for a specific industry and size, and averages blend strong businesses with weak ones. The IRS guidelines tell appraisers to choose multiples “consistent with the benefit stream,” which in plain terms means an SDE multiple belongs on SDE and an EBITDA multiple on EBITDA.

Income approach

The income approach values the cash a business is expected to produce. The simpler version, capitalization of earnings, divides one year of normalized cash flow by a capitalization rate: the annual return a buyer requires, less the long-term growth they expect. A discounted cash flow (DCF) analysis projects several years of cash flow and discounts each year back to today at a rate that reflects risk. BizBuySell describes the income approach as a complement to a market-based valuation for businesses with predictable earnings. Because small changes in the rate move the answer a lot, it works best as a cross-check that makes your risk and growth assumptions explicit, rather than as the headline number.

Asset approach

The asset approach adds up what the business owns, such as equipment, vehicles, inventory and receivables, at fair market value and subtracts what it owes. BizBuySell notes that it is commonly used for unprofitable or closing businesses, often alongside other methods. For a profitable service company it usually produces the lowest number, because it leaves out goodwill: the customer relationships, team and reputation that generate the earnings. It still matters. It sets a floor under the other methods, and it carries more weight for equipment-heavy businesses such as manufacturers and contractors.

Rules of thumb

A rule of thumb multiplies one figure, often revenue, by a typical multiple for your industry. In 2025 the average business sold on BizBuySell went for about 0.69 times annual revenue and 2.61 times annual earnings. BizBuySell itself separates pricing multiples from recent comparable sales from rule-of-thumb ranges, which it calls static “ballpark” ranges. Our guide to rule-of-thumb business valuation explains why two businesses with the same revenue can be worth very different amounts.

For a profitable owner-operated company, most valuations lean on the market approach, use the income approach to test it and check the asset approach to confirm the floor. If the methods disagree sharply, look for the assumption driving the gap before you settle on a number.

Step 3: What moves your multiple?

Once earnings are set, the multiple does most of the work. An SDE multiple of 3, for example, means a buyer pays three times one year of SDE, in effect paying up front for about three years of today's earnings. The multiple answers two questions: how confident is the buyer that these earnings will continue, and how easily can the business transfer to a new owner? Figure 3 shows the factors that most often compress or expand it for the same level of earnings.

Figure 3What moves the multiple
Compresses the multiple
  • Heavy owner dependence
  • Customer concentration
  • Declining or volatile earnings
  • Unreconciled or messy books
  • Thin management bench
  • Deferred equipment spending
Expands the multiple
  • Recurring or contracted revenue
  • Diversified customers
  • Documented systems and a management team
  • Consistent growth
  • Clean, reconciled financials
  • Strong buyer and lender demand for the industry
For the same earnings, owner dependence, customer concentration and messy books compress the multiple, while recurring revenue, diversified customers, documented systems and clean financials expand it.

Customer concentration

BizBuySell's guidance for buyers offers a general rule of thumb that no single customer should account for more than 10% of a company's revenue. Above that, a buyer has to consider that one lost account could take a large share of the earnings with it, and lenders may offer higher rates or less favorable terms. Buyers often respond with structure rather than a flat discount: an earnout that pays part of the price only if targets are met, seller financing, or payments tied to keeping key customers. Each of those shifts risk, and part of your price, back to you.

Owner dependence

BizBuySell's valuation guide puts it plainly: “A business managed largely by employees is much more valuable than one whose owner needs to work 60 hours a week.” If customers, suppliers or staff rely on you personally, a buyer has to price in the chance that value walks out the door when you do. Our guide to reducing owner dependence covers practical steps you can take over four quarters.

Step 4: What is your business worth? A worked example

A single number hides the real question: value to whom, and on what terms? The most useful answer comes from building three ranges for the same business and seeing where they overlap. Here is the illustrative HVAC company from Figure 1, with $720,000 of SDE and $570,000 of adjusted EBITDA.

Market value: what similar businesses sell for

In BizBuySell's third-quarter 2026 data, businesses that sold for more than $1 million averaged 3.73 times cash flow, and the median one had $559,000 of cash flow. Our company is a little larger than that median. Assume, for illustration, that its recurring maintenance contracts support a multiple near the average while its reliance on a few large commercial accounts holds it back, so a reasonable span is 3.0 to 3.8 times SDE. That gives a market value of about $2.2 million to $2.7 million ($720,000 × 3.0 = $2,160,000; $720,000 × 3.8 = $2,736,000).

Income value: what the cash flow is worth

A buyer who hires a manager keeps the $570,000 of adjusted EBITDA. Set aside an illustrative $50,000 a year to replace trucks and equipment, and $520,000 of pre-tax cash flow remains. Capitalizing it at illustrative rates of 20% to 23%, a buyer's required return less expected growth, gives about $2.26 million to $2.6 million ($520,000 ÷ 0.23 and $520,000 ÷ 0.20). The rate does the heavy lifting: a buyer who sees more risk uses a higher rate and arrives at a lower value.

Financeable value: what a lender can support

Most buyers of a business this size borrow. Under the SBA's current rules for most 7(a) acquisition loans, described in the next section, cash flow must cover loan payments at least 1.25 times. Start with SDE of $720,000, subtract a $150,000 salary for the new owner and the $50,000 equipment reserve, and $520,000 is left to pay the loan. At 1.25 times coverage, payments can be up to $416,000 a year. On a 10-year loan (SBA 7(a) terms run 10 years or less unless the loan finances real estate or long-lived equipment) at an illustrative 10% interest rate, that supports about $2.62 million of debt. Add the buyer's 10% equity and the lender test allows a price of up to about $2.9 million, ignoring closing costs and working capital for simplicity. A more cautious lender that wanted 1.5 times coverage would support about $2.43 million. Figure 4 puts the three ranges side by side.

Figure 4One business, three values
Market valueWhat similar businesses sell for
$2.2M–$2.7M3.0–3.8× SDE
Income valueWhat the cash flow is worth
$2.3M–$2.6M3.1–3.6× SDE
Financeable valueWhat a buyer's lender can support
$2.4M–$2.9M3.4–4.0× SDE
Working rangeWhere all three overlap
$2.4M–$2.6M3.4–3.6× SDE
$2.0M$2.25M$2.5M$2.75M$3.0M

Illustrative company with $720K of SDE. Dashed line: 3.73× SDE, BizBuySell's Q3 2026 average cash-flow multiple for businesses that sold for more than $1 million. Financeable value assumes 1.25× to 1.5× coverage, a 10-year loan at 10% and 10% buyer equity.

Illustrative: for a company with $720K of SDE, market value is about $2.2M to $2.7M, income value $2.3M to $2.6M and financeable value $2.4M to $2.9M. The working range where all three overlap is about $2.4M to $2.6M.
View the data behind this figure
Market value (3.0–3.8× $720K SDE)$2,160K – $2,736K
Income value ($520K cash flow ÷ 23% to 20%)$2,261K – $2,600K
Financeable value (1.5× to 1.25× coverage of $520K; 10-year loan at 10%; 10% equity)$2,429K – $2,915K
Working range (overlap of all three)$2,429K – $2,600K
3.73× SDE reference (BizBuySell Q3 2026, sales over $1M)≈ $2,686K

Your working range

The three ranges overlap between about $2.4 million and $2.6 million, roughly 3.4 to 3.6 times SDE. That is a defensible working range: comparable sales support it, the cash flow justifies it and a lender can finance it. A price at the top of the market range, about $2.7 million, would need a buyer who sees less risk than our assumptions do, and anything above about $2.9 million would fail the lender test even at the minimum coverage. The numbers here are illustrative; the method is the point. Build all three ranges for your own business, then be ready to explain any gap.

How do SBA lending rules affect what your business is worth?

For many sellers, the buyer's lender effectively sets the ceiling. In BizBuySell's Q3 2026 survey, 78% of buyers said they expect to use SBA financing to complete an acquisition. The SBA's updated lending rules for 7(a) loans, SOP 50 10 8.1, took effect on October 1, 2026. The points below come from summaries by SBA lenders and law firms (Starfield & Smith, PilieroMazza, Live Oak Bank and Beancount) rather than the SOP text itself:

  • Coverage on past results. Most acquisitions need cash flow of at least 1.25 times the loan payments, measured on the last fiscal year or an average of the last two. Projections cannot be used to meet it.
  • Buyer equity. A first-time acquisition needs equity of at least 10% of total project costs, and that minimum cannot be reduced.
  • Seller notes. A seller note counts toward the buyer's equity only on full standby, with no payments for the life of the loan, and together with similar sources it can cover no more than half of the required injection.
  • Independent checks. The lender commissions a business valuation, and acquisitions priced at $3 million or more, excluding owner-occupied real estate, generally also need a quality-of-earnings report.
  • Transition. Sellers can stay on as consultants for up to 24 months after the sale.

The maximum 7(a) loan is $5 million (SBA). The practical lesson is timing. Because lenders now underwrite on historical results, the improvements you make need to show up in a full fiscal year of financial statements before you sell, not in a forecast. Your advisors and the buyer's lender will handle the specifics, but a price the cash flow can't finance is rarely a price you will collect.

What does the 2026 market data say?

Published data helps you sanity-check an estimate. In the third quarter of 2026, 2,132 businesses changed hands, essentially flat from the second quarter and down 7% from a year earlier, while the median sale price rose 17% to $350,000 (BizBuySell Insight Report, Q3 2026). BizBuySell's president, Bob House, summed up the mood: “Confidence has softened, but buyers haven't left the market. They're simply becoming more selective.”

Size makes a large difference. Businesses that sold for more than $1 million, a record 22% of the quarter's sales, averaged 3.73 times cash flow and 100.8% of their asking price. Those under $1 million averaged 2.30 times cash flow and 93.6% of asking, at a median price of $250,000 (BizBuySell Q3 2026, via Small Business Trends). Industry matters too: manufacturers averaged 3.02 times cash flow and restaurants 2.39 times. And buyers are skeptical of asking prices, with nearly half of those surveyed saying businesses on the market are overvalued.

For larger companies, the IBBA and M&A Source Market Pulse survey of business brokers and M&A advisors put the multiple for deals of $5 million to $50 million at 5.8 times EBITDA in the second quarter of 2026, up from 5.5. James Parker, the IBBA's 2026 chairman, noted that above $2 million strong businesses still draw meaningful competition, while at the smallest end of the market buyers have more leverage and are more sensitive to financing, margins and operating risk. Treat every average as a reference point, not as your multiple.

Do you need a formal business valuation?

An indicative valuation is an estimated range built from your normalized earnings, market multiples and risk factors, like the worked example above. It is relatively fast and inexpensive, and it is the right tool for planning: when to sell, which improvements matter most and whether the number supports your retirement. It is not a document for the IRS or a court.

A formal valuation is a detailed written report from a credentialed appraiser. Common credentials include the ASA (Accredited Senior Appraiser) from the American Society of Appraisers, the CPA/ABV (Accredited in Business Valuation) from the American Institute of CPAs, and the CVA (Certified Valuation Analyst) from NACVA (Mercer Capital). For tax filings such as estate and gift tax returns, the IRS's own valuation guidelines call for considering all three approaches. For disputes, buy-sell agreements and other legal events, ask your attorney which standard of value applies.

If your buyer uses an SBA loan, the lender will commission its own business valuation, and larger deals add a quality-of-earnings review. A lender's valuation that comes in below your agreed price can reopen negotiations, so know your financeable value before you sign a letter of intent.

How can you raise the value before you sell?

Because value is earnings times a multiple, improvements that lift both compound. Most of the value you can add in the next one to three years comes from four areas:

  1. Earnings quality. Keep clean, reconciled monthly financials and a documented schedule of add-backs, so a buyer and their lender can verify what you earn.
  2. Transferability. Hand customer relationships, pricing decisions and key vendor contacts to your team, and document how the work gets done.
  3. Customer diversification. If one account is well above 10% of revenue, grow others or put that relationship under a written contract.
  4. Documentation. Keep contracts, leases, licenses and operating procedures current and easy to find, because gaps found in diligence tend to become price cuts.

Start early. Under the SBA's historical cash-flow test, an improvement helps a buyer's financing only once it appears in a full year of results.

Valuation mistakes that cost owners money

  • Pricing from what you need. Buyers price verified earnings and risk, not your retirement plan.
  • Using an average as your multiple. Size, industry and risk move individual businesses far from any published average.
  • Mixing yardsticks. An EBITDA multiple applied to SDE, or a multiple for $5 million companies applied to a $500,000 one, inflates the answer.
  • Counting add-backs you can't prove. Undocumented adjustments tend to be multiplied out of the price in due diligence.
  • Skipping the lender test. A price the cash flow can't finance rarely closes.
  • Valuing once and forgetting it. Multiples and your own results change every quarter.

Next steps: turn a guess into a working range

  1. Pull three years of tax returns and financial statements, plus year-to-date results.
  2. Calculate SDE and adjusted EBITDA, with a document behind every add-back.
  3. Build three ranges, market, income and financeable, and find where they overlap.
  4. List your risk factors honestly and take the Exit Readiness Scorecard to see which value drivers need work.
  5. Pick the two or three changes that would move your range most, and put dates on them.
  6. Refresh the range at least once a year, and hire a credentialed appraiser when you need a formal valuation.

If you plan to sell in the next few years, the most valuable work is improving the inputs. WorthAccelerator is one way to keep this organized: it gives you an indicative valuation range, shows which value drivers are holding it back and tracks your progress in 90-day sprints, while valuation, tax, legal and deal work stay with your advisors.

Frequently asked questions

How do I calculate what my business is worth?

Start with normalized earnings: SDE for an owner-run business or adjusted EBITDA for one with managers in place. Multiply by a range of multiples from recent sales of similar businesses, adjust for risks such as owner dependence and customer concentration, then check the result against an income-based value, the asset floor and what a buyer's lender could finance.

What multiple do small businesses sell for in 2026?

In Q3 2026, businesses that sold on BizBuySell for more than $1 million averaged 3.73 times cash flow, and those under $1 million averaged 2.30 times. For larger companies valued on EBITDA, the Market Pulse survey put deals of $5 million to $50 million at 5.8 times in Q2 2026. Your own multiple depends on size, industry, growth and risk.

What are the three main business valuation methods?

The market approach compares your business with similar businesses that have sold. The income approach values the cash flow it is expected to produce, by capitalizing one year of earnings or discounting several years. The asset approach adds up what the business owns, less what it owes. Most small business valuations lean on the market approach and use the other two as checks.

Is SDE or EBITDA better for valuing my business?

Neither is better; they fit different businesses. SDE suits smaller, owner-operated companies where the buyer will likely step into your day-to-day role. Adjusted EBITDA suits larger companies with management in place, because it deducts a market-rate salary for the person running the business. Many businesses in between are looked at both ways, so it helps to calculate both.

Does revenue determine what my business is worth?

Less than most owners expect. In 2025 the average business sold on BizBuySell went for about 0.69 times revenue, but buyers of established private businesses price on earnings, because earnings repay their investment and service their loan. Two companies with the same revenue can have very different values if one has higher margins, cleaner books or less dependence on the owner.

How often should I get my business valued?

For planning, refresh an indicative range at least once a year and after any major change, such as losing a large customer or hiring a general manager. If you plan to sell within a few years, updating more often shows whether your improvements are moving the range. A formal appraisal is usually needed only for specific tax, legal or financing events.

Sources

Last reviewed November 16, 2026. Market figures are from the sources above and change each quarter.

This article is general information for business owners, not a valuation or appraisal, and not tax, legal or investment advice. Figures labeled illustrative describe hypothetical companies. Talk to a credentialed appraiser, M&A advisor or CPA about your situation.

Know what it’s worth.See what it could be.

Your free value snapshot needs no sales call. Upload your P&Ls and see where you stand.